Surfboard Wall Mount for Brick Wall

The Perfect Way to Mount Your Surfboard on Brick

A surfboard wall mount for brick wall transforms your board from storage problem into statement piece. Brick walls present unique challenges for mounting, but with the right hardware and technique, you can create a secure, attractive display that showcases your gear. Whether you're a serious surfer with multiple boards or someone who just loves the aesthetic, mounting your surfboard on brick keeps it accessible, protected, and ready for your next session. The key is choosing a mount designed specifically for brick surfaces and installing it properly so your board stays exactly where you put it. We'll walk you through everything you need to know to mount your surfboard safely and stylishly.

Free Gift

Air Freshener Trio

$10.00 $0.00

Just pay shipping — enjoy a fresh ride on us!

5 Essential Tips for Mounting a Surfboard on Brick Wall

Use heavy-duty anchors rated for brick. Standard drywall anchors won't cut it. Invest in concrete or masonry anchors that can handle the weight of your board, typically 6-8 pounds. These grip inside the brick and won't pull loose over time.

Locate studs or use a stud finder. While brick is solid, finding the densest points helps. Mark your mounting points carefully before drilling. A level is your friend here, preventing that awkward tilted board look.

Choose the right drill bit for brick. Standard bits will slip and slide. Grab a masonry or carbide-tipped bit sized to match your anchors. Drill slowly and let the bit do the work without forcing it.

Space your mounting points properly. Most surfboards need two mounting points, typically 18-24 inches apart horizontally. Wider spacing distributes weight better and keeps your board stable and level on the wall.

Add padding to protect your board. Even with a quality mount, your surfboard's rails can get dinged. Use foam padding or rubber grips where the mount contacts your board to prevent damage and extend its life.

Why Brick Walls Need Special Mounting Solutions

Brick is denser and harder than drywall, which sounds great for holding weight, but it actually requires different hardware. Standard wall anchors designed for drywall simply won't grip brick properly. You need anchors specifically made for masonry or concrete surfaces. The good news is these anchors are widely available and affordable. They work by expanding inside the brick hole, creating a mechanical grip that holds tight. When you're mounting a surfboard wall mount for brick wall, this matters because your board is putting constant downward pressure on the mount. Poor anchors mean your board could slip, shift, or worst case, come crashing down. Quality masonry anchors rated for at least 50 pounds of holding power give you the security to hang your board and forget about it. Check out our racks collection for mounts specifically engineered for solid surfaces like brick.

Common Questions

Can I mount a surfboard directly on brick without special anchors?

No, you really shouldn't. Brick is too hard and dense for regular wall anchors. You need masonry anchors specifically designed to grip inside brick. Using the wrong hardware risks your board falling and damaging your wall or, worse, your board. Spend the extra few dollars on proper masonry anchors and drill bits. It's the difference between a secure mount and a disaster waiting to happen.

How much weight can a brick wall surfboard mount hold?

A properly installed mount on brick can easily hold 50-100 pounds, depending on your anchors and hardware. Most surfboards weigh 5-10 pounds, so you have plenty of safety margin. The limiting factor is usually the quality of your anchors and how well you drill the holes. Use anchors rated for at least 50 pounds and you'll have no issues.

What's the best height to mount a surfboard on a brick wall?

Mount your board at eye level or slightly higher, usually 5-6 feet from the floor. This puts it on display without blocking your view or becoming a head-bumping hazard. It also makes it easier to grab your board when you're heading out. Consider traffic flow in the room and leave at least 2 feet of clearance on either side of the board.

Do I need to seal the brick after drilling holes?

You don't need to seal small mounting holes, but if you're concerned about water intrusion or moisture, a small amount of silicone caulk around the anchor base helps. Brick is porous and naturally breathes, so tiny holes won't cause problems. Just make sure your anchors are installed snugly so water doesn't pool around them.

Can I use the same mount for multiple boards on brick?

Yes, if your mount is designed for it. Some mounts stack or allow side-by-side installation. Just make sure you have enough wall space and that each mounting point is properly anchored into brick. Spread your boards out to distribute weight evenly and prevent them from bumping into each other.

Ready to Mount Your Surfboard?

Stop leaning your board against the wall and give it the display it deserves. Our Sun Rack is engineered to work beautifully on any wall surface, including brick. With premium bamboo construction and a built-in shelf for your wax and fins, it's both functional and gorgeous. Whether you're outfitting a garage, bedroom, or living room, a proper surfboard wall mount for brick wall keeps your gear safe and your space organized.

Shop Surfboard Mounts

Living in Sunshine