Wall Mount for 10 Foot Longboards

A wall mount for 10 foot longboards is one of the smartest moves you can make for your space. Instead of leaning your board against a wall or taking up valuable closet real estate, a proper wall mount keeps your deck secure, protected from damage, and actually turns it into part of your room's décor. Whether you're a serious rider or just love the look of a quality longboard, mounting it on the wall means you get a conversation starter plus a practical storage solution. The right wall mount distributes the weight evenly across your board's length, so there's no sagging or warping over time. You'll want something that works with your home's style, holds up to the weight, and doesn't require a complete wall renovation to install.

Storing a 10 foot longboard horizontally on the ground eats up floor space and puts your board at risk of being stepped on or damaged. Leaning it against a wall might work short-term, but it can warp the nose or tail over months. A wall mount solves both problems. Your board stays flat, supported evenly along its length, and completely out of the way. Plus, you're not hiding an investment you probably care about. A quality longboard deserves to be seen. When you mount it properly, it becomes functional art. Check out our accessories collection for mounting hardware and complementary pieces that work with your setup. If you're also interested in protecting other gear, browse our racks section for additional storage solutions that pair well with wall mounts.

Can a wall mount for 10 foot longboards work on apartment walls?

Yes, most quality wall mounts can be installed in apartments using heavy-duty drywall anchors if you can't drill into studs. Look for mounts rated for at least 20-25 pounds and use anchors designed for your wall type. Always check your lease before mounting anything, and consider using command strips or removable adhesive mounts if you want zero permanent holes.

How much space do I need above and below the mount?

For a 10 foot longboard, you'll need at least 10 feet of horizontal wall space. Vertically, leave about 6-12 inches of clearance above and below the board so it sits centered and doesn't touch the ceiling or baseboard. Measure your wall before purchasing to confirm fit.

Will a wall mount damage my longboard?

Not if you use the right mount with protective padding. Mounts with rubber, cork, or foam contact points distribute pressure evenly and prevent scratches. Avoid cheap metal-only mounts that can dig into your deck's finish over time.

Can I mount my longboard vertically instead of horizontally?

Vertical mounting is possible but not recommended for 10 foot boards. Vertical mounting puts all the weight on the nose or tail, which can stress the board and cause warping. Horizontal mounting distributes weight evenly along the deck and is the safer, more stable choice.

What's the best way to install a wall mount for a 10 foot longboard?

Locate wall studs with a stud finder and drill into them for maximum support. If studs aren't positioned well, use heavy-duty anchors rated for at least 25 pounds per anchor. Use a level to ensure the mount is perfectly horizontal before tightening. Install the mount at eye level or slightly higher so your board is easy to admire and access.